![]() |
![]() |
Parameter: The equipment is mainly used for concrete structure protective layer, rebar’s integrity measurement and control, which can measure rebar’s trend, thic..[Detailed] |
![]() |
![]() |
Parameter: 1、Testing Fineness Of Screen Analysis: 80um(Optional 45um Negative Pressure Sieve) 2、Automatic Control Time Of Screen Analysis:2min 3、Adjustable Wor..[Detailed] |
![]() |
![]() |
Parameter: Mud contain arenaceous tester[Detailed] |
![]() |
![]() |
Parameter: It can measure the viscosity of mud in well site and laboratory, According the time needed by 500mm3 flowing from the viscosimeter,it can calculate th..[Detailed] |
![]() |
![]() |
Parameter: It is used for measuring the weight of mud in well site and laboratory,unit is g/mm3.It is a balance with different length’s lever.It’s lever knife ed..[Detailed] |
![]() |
![]() |
Parameter: 1.Temperature range: normal temperature 100℃ 2.Time range: 0.5-24h 3.U electrical heated tube:1000W/220V 4.Warming of water: 2h at 100℃ 5.Three ce..[Detailed] |
![]() |
![]() |
Parameter: 1.Temperature in the incubator: ±1℃ 2.Humidity:≥90% 3.Working voltage:220V±10% 4.Heating power:600W 5.Cooling power: 180W ( 360W) 6.Test specimen..[Detailed] |
![]() |
![]() |
Parameter: 1.Double sides NDT, the floor does not require any treatment, without coupling agent; 2.Fast test, 3-5 points can be measured every three minutes on ..[Detailed] |
![]() |
![]() |
Parameter: 20*25 cement sample barrels[Detailed] |
![]() |
![]() |
Parameter: Used for detecting Reye folder qualified or not,also for judging the stability of cement through the distance appreciation at which the two pointers o..[Detailed] |
![]() |
![]() |
Parameter: It is used for measuring loss of water of mud in the well site or laboratory.The filtrate quantity some volume mud flowing under the specified air pre..[Detailed] |
![]() |
![]() |
Parameter: The mixer can measure the cement mortar strength 1,speed of the stirring impeller: low speed: rotation 140 ± 5r/min revolution 62 ± 5r/min high spee..[Detailed] |
![]() |
![]() |
Parameter: For testing standard hard consistency, setting time of cement and making stable test block[Detailed] |
![]() |
![]() |
Parameter: Widely used for surface area of cement, ceramics, abrasives, metal, gunpowder and other non-porous powder materials.[Detailed] |
![]() |
![]() |
Parameter: It’s structural behaviour completely meets the experiment requirements.It has two roller bearings,the distance can be adjusted and equipped with diffe..[Detailed] |